Happy New Year! After buying our bus in April '20, we replaced the rear shoes and cylinders and bled the system. Front pads seemed fine, as did hoses. We have driven the bus many miles since then with the brakes working well. My daughter took the bus to visit a neighborhood friend and reported that the brakes faded almost all the way to the floor. She was able to pump the brakes to stop. However, after the pumping the brakes were fine again. On her return, I took the bus for a test on the exact route, no issues and the brakes were fine there and back. I also tested the booster by pressing the pedal while starting and, as expected, the pedal dropped slightly - but settled well over half the available travel, as its always been. Fluid is full with no apparent leaks. The reason why seemingly good brakes would intermittently fade? Brake master cylinder - apparently, when a MC is about to fail fully, intermittent loss of pedal pressure is common. I soaked the brake pipe nuts in PB Blas
A blog documenting the resurrection of a 1976 Volkswagen Type 2 Bay Window bus.